Lighting & LED
Part of the Electrical & Electronic Equipment sector
Lighting and LED products light homes, workplaces, streets and industry — from luminaires and lamps to LED modules, drivers and control gear. This hub explains the main categories and how to find and compare verified lighting suppliers on Digibition.
Looking to source in this sector, or want your company to appear here? Browse the directory or list your company.
Overview
Lighting and LED covers finished luminaires and lamps as well as the components behind them: LED chips and modules, drivers and power supplies, optics and lenses, heat sinks, and lighting controls. Applications range from indoor and decorative lighting to commercial, industrial, street and outdoor lighting.
Products are defined by light output (lumens), colour temperature and colour rendering, efficacy (lumens per watt), beam angle, ingress protection for outdoor use, and the controls or dimming they support. Buyers include lighting contractors, wholesalers, specifiers, OEMs integrating LED into products, and distributors.
On Digibition, luminaire makers, LED module and driver manufacturers and lighting distributors publish verified profiles, so professional buyers can discover and compare them by specialization and country.
What to check when sourcing
When you source lighting and LED, the fundamentals are matching the light to the application, verifying the photometric claims, and confirming compatibility between light source, driver and controls. Check lumen output, colour temperature and colour rendering against your requirement, and treat efficacy and lifetime figures as claims to be supported by test data.
Ask suppliers about photometric reports, driver compatibility and dimming protocols, thermal management, warranty terms and the standards and approvals your market requires. For outdoor or harsh locations, confirm the ingress and impact protection rating. Because stated lifetime and lumen-maintenance numbers vary with conditions, ask how they were measured before you rely on them.
Use the directory to shortlist suppliers by specialization and country, then contact several and compare their responses before you commit. This is general information, not legal or technical advice.
What to check when sourcing lighting and LED
| Criterion | What to look for |
|---|---|
| Light output | Lumen output suited to the space and task |
| Colour | Colour temperature (K) and colour rendering (CRI) for the application |
| Efficacy & lifetime | Lumens per watt and lifetime figures backed by test data |
| Driver & control | Driver compatibility and dimming or control protocol |
| Protection | IP and IK ratings for outdoor or harsh locations |
| Standards & warranty | Required approval marks and clear warranty terms |
Frequently asked questions
- What is the difference between a lamp, a luminaire and an LED module?
- A lamp is the replaceable light source, a luminaire is the complete fitting that houses and powers it, and an LED module is the board of LEDs used inside a product or luminaire. Sourcing decisions often involve all three plus the driver that powers them.
- What do lumens, colour temperature and CRI mean?
- Lumens measure total light output, colour temperature (in kelvin) describes whether light looks warm or cool, and CRI (colour rendering index) describes how faithfully colours appear under the light. Match all three to the space and task rather than to wattage alone.
- How do I find lighting and LED suppliers?
- Use the Digibition directory to filter by this specialization and by country, then open each company profile to review its products, certifications and specializations. You can message suppliers directly, or add several to a quote list and request quotes from all of them at once.
- Why do driver and control compatibility matter?
- An LED light source only performs as intended with a matched driver, and dimming or smart control works only when the product supports the same protocol. Confirming compatibility avoids flicker, failures and control problems after installation.
- What should I check before placing a large order?
- Confirm photometric data, driver and control compatibility and the approvals your market requires, and agree lead time, minimum order quantity and warranty terms. Where possible, request samples and evaluate them on site before committing to volume.
Looking to source in this sector, or want your company to appear here? Browse the directory or list your company.
Important notice
This page is general industry information published by Digibition for educational purposes only. It is not legal, financial, tax, customs, regulatory, or other professional advice, and it is not a substitute for advice from a qualified professional. Standards, certifications, duties, taxes, and regulatory requirements differ between countries and markets and change over time; nothing here is guaranteed to be accurate, complete, or current. Verify any requirement independently with a qualified adviser and the relevant competent authority before you act. Digibition is an online company directory and digital-fair platform; it is not a party to any transaction between users and does not endorse, guarantee, or accept responsibility for any third-party company, product, claim, or certification. A company being reviewed or approved for listing refers only to Digibition's internal listing review and is not a warranty of that company's quality, legality, solvency, or performance. Any mention of specific standards or certifications is illustrative and is not an endorsement or a statement of compliance. To the fullest extent permitted by applicable law, Digibition accepts no liability for any loss or damage arising from reliance on this page; any reliance is at your own risk.